Supported Raspberry Pi
- Raspberry Pi 5
- Raspberry Pi 4
- Raspberry Pi 4 Model B
- Raspberry Pi 3 Model A+
- Raspberry Pi 3 Model B+
You can set up digital signage on your Raspberry Pi using one of two installation methods, depending on your needs:
Option 1: Flash digital signage Custom Android 15 Image This is the recommended and easiest way. This image is optimized for Raspberry Pi 4 and 5, comes with the digital signage app pre-installed, and ensures maximum performance and stability.
Option 2: Install digital signage on Raspberry Pi OS For users who prefer to keep Raspberry Pi OS, you can install digital signage directly.
Choose the method that best fits your setup and follow the step-by-step guide below.
Using the digital signage Custom Android Image is highly recommended for the best performance and stability.
Why use the custom image?
##### 1. Download the Image
- Download the image file for Raspberry 4: rpi4-aosp15-ez-v1.img.zip
- Download the image file for Raspberry 5: rpi5-aosp15-ez-v1.img.zip
##### 2. Flash the Image to an SD Card
- Insert a microSD card (32GB or larger recommended) into your computer.
- Download the Raspberry Pi Imager from raspberrypi.com/software and run the installer.
- Open Raspberry Pi Imager:
[image: choose raspberry pi device]
[image: choose raspberry pi model]
[image: choose custom OS]
- select rpi5-aosp15-ez-v1.img.zip (for Raspberry Pi 5).
- Click Choose Storage → select your SD card.
[image: choose storage device]
[image: OS customization settings]
[image: Continue width=1200 height=843 style=max-width:100%;height:auto]
[image: Write on storage device]
[image: Cancel Verify]
[image: Write Successful]
##### 3. Boot the Raspberry Pi
##### Option A: Using a Keyboard
##### Option B: Using a Mouse
That’s it! Your Raspberry Pi is now running digital signage Android 15 and ready to use.
##### Pre Installation steps
Download and install Raspberry Pi OS with desktop on your Raspberry Pi
Check the below link for more information on how to install Raspberry Pi OS on your device.
Setting up your Raspberry Pi
- Make sure Chromium browser is installed:
- Disable Screen Blanking:
- Step 1: On the main Raspberry Pi menu, click on Raspberry Pi Configuration under Preferences
[image: Raspberry-Pi-Configuration width=772 height=549 style=max-width:100%;height:auto]
- Step 2: Click to the “Display”.
[image: Raspberry-Pi-Display width=826 height=472 style=max-width:100%;height:auto]
- Step 3: Disable the “Screen Blanking”
[image: Raspberry-Pi-Screen-Blanking width=719 height=406 style=max-width:100%;height:auto]
##### Installation steps
- Step 1: Open Terminal as the below:
[image: Raspberry-Pi-Screen-Blanking width=386 height=325 style=max-width:100%;height:auto]
- Step 2: Copy paste the below script into the terminal:
For Raspberry Pi OS (64-bit):
/bin/bash -c "$(curl -fsSL https://appds.io/rpi64.sh)"
For Raspberry Pi OS (32-bit):
/bin/bash -c "$(curl -fsSL https://appds.io/rpi32.sh)"
This script will create a folder under your home directory called “digital-signage” and download the player binary, then set up a startup script to start the app on boot time.
- Step 3: Restart your device by writing reboot in the terminal
reboot
↑ TopThe latest operating system is configured with the Wayland desktop manager which is causing issues when starting the application in fullscreen mode. To solve the issue, switch from the Wayland desktop manager to X11.
Follow the below steps:
Open terminal and run the below command
sudo raspi-config
[image: Raspberry-Pi-Software-configuration width=639 height=361 style=max-width:100%;height:auto]
[image: Raspberry-Pi-Software-configuration width=640 height=353 style=max-width:100%;height:auto]
[image: Raspberry-Pi-Software-configuration width=642 height=354 style=max-width:100%;height:auto]
- Press Ok. You should see the message “Openbox on X11 is active” press Ok.
- Press finish, and you will be asked if you would like to reboot now; choose Yes.
--- <!-- source: https://digitalsignage.web.app/installation/install-digital-signage-vestel/ -->
↑ Top